Regulation No 26 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicles with. ECE R26 Regulation (03 Series, ) “The uniform regulations on vehicle chapter and section numbering betw een this standard and the ECE R ECE UNIFORM PROVISIONS CONCERNING THE APPROVAL OF: VEHICLES WITH REGARD TO THEIR EXTERNAL PROJECTIONS Incorporating.
|Published (Last):||14 February 2011|
|PDF File Size:||16.14 Mb|
|ePub File Size:||8.75 Mb|
|Price:||Free* [*Free Regsitration Required]|
The provisions of Paragraph 5. Taken from normal series production and, if possible, of the maximum nominal section width recommended for the wheel.
Licenses and Certificates
Nonetheless, the UN considers only original documents as adopted during World Forum sessions as the legal and official regulatory texts. UN R37 Filament Lamps. The Contracting Parties to the Agreement applying the regulation shall r266 to the United Nations secretariat the names and addresses of the Technical Services responsible for conducting approval tests and of the administrative departments which grant approval and to which forms certifying approval or extension or refusal or withdrawal of approval, or production definitely discontinued issued in other countries, are to be sent.
Eec provisions ee the approval of passenger cars with regard to electronic stability control systems This regulation was established through the extraction of ESC provisions from UN Regulation H. In the case where negative results are recorded during one of these visits, the competent authority shall ensure that all ee steps are taken to re-establish the conformity of production as rapidly as possible.
Date of report issued by that service: Maximum 30 per cent. OJ L 70, 9. Methods of determining the dimensions of projections and gaps. These requirements shall also be met by rear window wipers and headlamp wipers.
Starting 48 months after the entry into force to the 03 series of amendments to this Regulation, Contracting Parties applying this Regulation may refuse first national registration first entry into service of a vehicle which does not meet the requirements of the 03 series of amendments to this Regulation.
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility Electromagnetic Compatibility Electromagnetic Compatibility UN Regulation No.
Furthermore, aerials shall be so fitted to the vehicle, and if necessary their unattached ends so restricted, that no part of the aerials protrude beyond the extreme outer edge of the vehicle as defined in paragraph 2. UN R Frontal Impact ORS Restraint System in Frontal Impact Uniform provisions concerning the approval of passenger cars in the event of a frontal collision with focus on the restraint system This regulation ec for a ecce rigid barrier frontal impact test to evaluate the performance of occupant restraint systems.
Technical service conducting approval tests: For gaps of between 40mm and 25mm the radii of curvature shall be of 1mm or more.
Regulation ECE-R26 – Translation into Spanish – examples English | Reverso Context
Aimed particularly at reducing injuries to the elderly, the test sets a 42 mm ThCC threshold that will be strengthened to 34 mm for the HIII 5F in via the 01 series amendments. Application for type approval with regard to luggage racks, ski racks or radio receiving or transmitting aerials considered to be separate technical units.
An approval number shall be assigned to each vehicle type approved. Analysis of the metallurgic defects and of the test-pieces structure taken from the hub mounting area and in the disc to rim transition area or in the failure zone if any. It shall confirm that the tested wheel meets the requirements. NET Our online subscription service, offering immediate access to our extensive eec of global vehicle regulations, standards eve legislation.
Convertible vehicles shall be examined with the hood in both the raised and lowered f26.
Its first two digits at present 03 corresponding to the 03 series of r226 shall indicate the series of amendments incorporating the most recent major technical amendments made to the Regulation at the time of issue of the approval. UN R46 Indirect Vision. Jacking Brackets and Exhaust Pipes 6.
UN Ecs Heating Systems. The dimension of the projection of a component which is mounted on a convex surface may be determined either directly or by reference to a drawing of an appropriate section of this component in its installed condition. Stress corresponding to the maximum force F m. At the request of the aforesaid technical service, certain components and certain samples of the material used shall likewise be submitted.
Revision and, if applicable, the procedure contained in Paragraph 7. Miscellaneous The test report shall contain the details and results of the tests carried out. These regulations and WP. r2
Its first two digits at present 03 corresponding to the 03 series of amendments which entered into force on June 23, shall indicate the series of amendments incorporating the most recent major technical amendments made to the Regulation at the time of issue of the approval.
Luggage racks and ski racks. Folds in body panels may have a radius of curvature of less than 2. Approval with regard to luggage racks, ski racks or radio receiving or transmitting aerials considered exe be separate technical units. Should the responsible authority consider it necessary, it may request a further specimen.